http:// 2013-04-18T06:14:27Z 2013-04-18T06:14:27Z flexible-double-hemispheric-camera-can-secure-two-rooms-with-a-single-unit

Thursday, 18 April 2013  The Mobotix S14 FlexMount from Madison Technologies, the world’s first flexible double hemispheric camera, is now available.  The compact S14D FlexMount is a universally deployable, easy concealable video system with a highly detailed resolution of up to six megapixels. The fully weatherproof IP camera has two miniature sensor modules, which are each connected to the camera housing with a two-meter cable. Thanks to the hemispheric dual lens, two separate rooms can be secured simultaneously without any blind spots.The camera, which is available in both mono (S14M) and dual (S14D) versions, offers a wide range of application opportunities. For instance, the S14D can be equipped with two hemispheric lens units with integrated microphone that connect to the main housing via cables. This makes it possible to fully secure two rooms located next to, or on top of, one another with just one single S14D unit. The slim design of the module units, which are available in white and black, permit an extremely discreet installation.Both module units and the separate housing with the latest dual camera board are weatherproof in accordance with IP65 and operate in a temperature range of -30°C to +60°C.  The flat housing, including flash memory with up to 64 GB and all external connectors (Ethernet, MiniUSB, MxBus), can be installed discreetly and with optimal protection behind a wall or ceiling panel so that only the lens units in their ultra-compact protective housing are visible. Power is supplied very cost effective via a network cable (PoE). At less than five watt-hours, the energy consumption is extremely low.The camera's technical features and very discreet mounting open up a whole range of application opportunities. In L-shaped rooms, for example, the two sensor modules can be positioned at the corner in correct angles to each other, therefore capturing the entire room without any blind spots. Therefore, the S14 is particularly well-suited for use in hotels, banks and retail stores where the highest levels of security and discretion are required. The S14 can also demonstrate its strengths at security gates and in offices. MOBOTIX also offers the appropriate installation accessories for mounting the sensor module on thicker walls. Using several extension pieces (each approx. 40 mm), longer "tunnel holes" through a wall can also be bridged.For more information, contact Madison Technologies networking team on 1800 72 79 79 or at www.madisontech.com.au/mobotix

2013-01-17T07:23:42Z pi-certified-plug-and-play-profinet-enabled-ethernet-switches

Moxa’s EDS-405A and EDS-408A from Madison Technologies are 5 and 8-port managed Ethernet switches with PROFINET enabled. With embedded PROFINET, the PN switches can be easily integrated into the Simatic Step 7 engineering tool. It is more convenient for automation engineers to configure through Step 7 and monitor with automation HMIs.The EDS-405A/408A-PN switches with fast booting, Turbo Ring and Turbo Chain fast-recovery technology, can optimize PROFINET network performance. Moxa’s PROFINET switches also support a variety of useful management functions, such as IGMP snooping, IEEE 802.1Q VLAN, QoS, port mirroring, SNMP, bandwidth management, and warning by email or relay.Features include:Command Line Interface (CLI) for quickly configuring major managed functions IPv6 Ready logo awarded (IPv6 Logo Committee certified) DHCP Option 82 for IP address assignment with different policies Support EtherNet/IP and Modbus/TCP protocols for device management and monitoring PROFINET v2 conformance class B, GSD (General Station Description) v2, and SIMATIC STEP 7 device icons are available Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP snooping and GMRP for filtering multicast traffic Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism RMON for efficient network monitoring and proactive capability SNMPv1/v2c/v3 for different levels of network management security Bandwidth management to prevent unpredictable network status Port mirroring for online debuggingFor more information, contact a Madison Networking Specialist on 1800 72 79 79 or via our website www.madisontech.com.au/moxa-eds

2013-01-17T05:02:22Z phoenix-audio-to-provide-audio-solutions-for-vidyo-users-worldwide

Madison Technologies is proud to announce that Vidyo Inc., a world leader in personal telepresence and video conferencing solutions, has tested and approved Phoenix Audio Technologies' Duet PCS personal audio solution as a recommended personal audio solution for Vidyo users worldwide. Available nationally, the Phoenix Duet’s built-in microphone and speaker delivers a large range of coverage due to their immense pickup and output capability. Noise suppression, echo cancellation and AGC are all features that make this perfect for desktop and small to mid-sized conference rooms. "We are very proud that Vidyo has chosen to add the Duet PCS as a recommended personal audio solution for Vidyo users worldwide," said Jacob Marash, Phoenix Audio Technologies' COO. "Our best in class audio solutions will be perfect for Vidyo users, providing HD audio for Vidyo's best in class Personal Telepresence solutions." Phoenix Audio Technologies' Duet PCS is the only personal speakerphone that provides real HD audio (16KHz). Available from Madison Technologies, the Phoenix range is ideal for all audio conferencing applications. For more information, contact a Madison Audio Visual Specialist on 1800 00 77 80 or via our website www.madisontech.com.au/phoenixduet

2013-01-10T04:32:06Z high-performance-hdmi-cables-that-offer-more

Using high quality, high performance HDMI cables is commonplace for reputable AV Installers and Integrators, but often the biggest problem with HDMI cables is the connectors themselves.  HDMI connectors are notoriously insecure, and can easily loosen. The HDMI connector’s tiny pins can become disengaged in a way often difficult to detect with the naked eye, causing errors up to a total loss of signal, resulting in service calls, time wasted and unhappy customers.  Thankfully, Perfect Path has a unique solution to this issue.Available from Madison Technologies, Perfect Path HDMI cables offer high quality and performance coupled with a patented Locking HDMI Connector boasting more than four times the holding retention of conventional HDMI cables; making sure that once you connect your device, it stays connected.The cables themselves offer full foil and braid shielding and a metal shield over connections preventing signal interference.  Consistent quality audio and video output, low signal egress levels and performance beyond the high speed HDMI cable specification is the result. Madison offers two ranges of the Perfect Path Locking HDMI cables, both of which are available in 60cm, 1.2m, 2.4m, 4.9m, 10.7m and 15.2m lengths:The 1000 Series High Speed HDMI® Cable with Ethernet Channel This HDMI cable breaks the boundaries of the HDMI system, now and for the future. The world's first truly locking HDMI solution, presented in a gleaming gloss nickel finish. If you want the HDMI cable that does everything, your decision has already been made.- Patented PerfectLock™ connectors- High Speed exceeding 10.2 Gbps Speed rating to deliver 1080p resolution and beyond- Ethernet Channel- Audio Return Channel- 3D and 4K x 2K ready- FTP (Foil & braid) cable shield, full metal connector shield700 Series - Locking High Speed HDMI® CablePerfect for systems without the HDMI Ethernet Channel. The HD 700 gives you the same ground breaking performance of the 1000 Series, without the Ethernet Channel feature. Ideal for current systems, as you wait on the debut of Ethernet Channel gear.- Patented PerfectLock™ connectors- High Speed exceeding 10.2 Gbps Speed rating to deliver 1080p resolution and beyond- Audio Return Channel- 3D and 4K x 2K ready- FTP (Foil & braid) cable shield, full metal connector shieldFor orders and information, contact your Madison Audio Visual expert on 1800 00 77 80 or visit www.madisontech.com.au/av 

2012-12-06T03:11:58Z acksys-ruggedised-wireless-for-transport-applications-now-available-from-madison-technologies

ACKSYS offers a wide range of ruggedised wireless equipment for industrial and transportation applications using the Wi-Fi IEEE 802.11 a/b/g/n standard in 2.4 & 5.x GHz bands.  This range of products addresses the specific issues associated with operating wireless equipment in vehicles.- “Aboard” and “Road” ranges for rail and road transport sectors- “Aboard” products certified to EN50155- Temperature hardened for -40°C to +70°C operation (typical)- Environmentally sealed to IP66- Lightning/Surge protection built-in- Very wide power supply voltage – typically +9 to +70VDC- Tough die-cast aluminium construction- Easy mounting tabs for secure fixing in vehiclesOne unique feature of the ACKSYS system is the removable “C-Key” which stores all configuration data and allows instant equipment swap-out and data restore functionality.The ACKSYS solution includes Point-to-Point, Point-to-Multipoint and Wireless Mesh technologies and is suitable for long-range line-of-sight and non-line-of-sight operation.  Applications include: access points, bridges, bridge-routers, repeaters, and serial to wireless gateways.ACKSYS provides excellent integration into industrial and vehicle systems with capability to:- Interface to truck telemetry and fleet management systems- Stream data from rolling stock to station- Wirelessly connect RS232, RS422, RS485 serial equipment together- Build a wireless bridge between a serial MODBUS network and MODBUS/TCP- Wirelessly connect Ethernet, MODBUS/TCP, PROFINET, Ethernet/IP, DNP3 equipmentFor more information, contact a Madison Wireless Specialist on 1800 12 22 23 or via our website www.madisontech.com.au/acksys 

2012-11-12T05:51:48Z madison-technologies-acquires-test-equipment-solutions

Madison Technologies is proud to announce the acquisition of test and measurement specialists, Test Equipment Solutions. Test Equipment Solutions represent and distribute quality test and measurement brands such as Fluke, Yokogawa, Rohde & Schwarz and Hameg in addition to providing electrical and electronic calibration services. “This acquisition means that Madison customers can access a complete range of test, measurement and calibration solutions and services for the electrical, broadcast, optical, cellular, HVAC and defence industries” David Redfern, Madison Managing Director said. “With the addition of the TES team’s technical expertise, Madison will continue to build on its enduring commitment to give customers the best products, advice and service across the cabling, networking, wireless and audio visual sectors.” For more information, call your Madison Test and Measurement expert today on 1300 788 626. 

2012-11-12T05:25:06Z partnership-results-in-turn-key-remote-environmental-monitoring

Madison Technologies and CoastalCOMS have partnered in developing a turn-key environmental and security monitoring solution.  The solution incorporates the latest Madison hardware technology (Rapid Deployment Camera) and CoastalCOMS’ core platform (federated cloud solution), which are designed to be deployed anywhere in the world without the need for any fixed cabling infrastructure. Environmental monitoring consists of two main components, video collection and data sampling (water or air). The main benefit being that these can be performed in real-time, remotely (via 3G and solar) and continuously rather than single samples per day.  CoastalCOMS core platform then fuses the collected data from the Madison Rapid Deployment Camera with other real-time data sampling and weather information to provide an overall view of the environment and its changing conditions. The solution incorporates real-time video streaming and storage saved locally or in the cloud – with secure viewing via a user’s computer, or smart device, such as a Samsung galaxy tab/phone, Apple iPhone & iPad. CoastalCOMS has been using the solution to perform environmental coastal monitoring and shoreline detection for the Gold Coast City Council where the Madison Rapid Deployment Camera continuously monitors the movement of sand on its pristine beaches.  The same hosted camera platform is also preforming a vital surveillance job for the Queensland Fisheries Patrol by monitoring whales as they travel up the Gold Coast coastline for any entanglements. For more information, contact a Madison Networking Specialist on 1800 72 79 79 or via our website www.madisontech.com.au

2012-11-12T05:15:34Z madison-now-distributing-plug-amp-play-audio-conferencing-devices-from-phoenix-audio

Madison Technologies has entered into a distribution agreement with leading developer of audio communications solutions Phoenix Audio Technologies.Available nationally, the Phoenix Audio range includes audio conferencing Microphones, Speakerphones, Mixers, Software, and other audio accessories that are designed to turn any office, boardroom or meeting room into a high quality audio conferencing facility.“Phoenix Audio Technologies is a welcome addition to our valuable selection of quality suppliers,” says Ken Kyle, General Manager of Audio Visual at Madison Technologies. “Audio, video or web-based conferencing allows businesses to communicate more effectively; classrooms to share experiences and teachings with others; and many other applications that provide improvements to one’s life or business”.For orders and information, contact your Madison Audio Visual expert on 1800 00 77 80 or visit www.madisontech.com.au/phoenix-audio

2012-11-12T05:11:19Z industrial-poe-boost-switch-for-vehicle-poe-ip-camera-applications

Available from Madison Technologies, the Korenix JetNet 3810Gf / 3810f series are Industrial PoE Boost Switches designed with 8 Fast Ethernet PoE and 2 Gigabit / 100Mbps SFP ports to extend the high and low bandwidth data through fiber uplink connection for flexible distance mobile surveillance applications. With the exclusive built-in Korenix patented vehicle PoE technology, the switches convert DC 12~24V from a battery to DC 48V for 8 PoE ports, offering up to 65W power to IEEE 802.3af compliant devices and therefore, making the deployment of standard PoE IP cameras feasible on buses, ships, carriages, etc. To guarantee the proper operation of the network system, JetNet 3810Gf / 3810f combine fault relay alarm function for providing auto warning once a port-link failure occurs. Combining QoS into the rugged design with -25~60oC wide operating temperature, JetNet 3810Gf and JetNet 3810f ensure the reliable and high quality video stream transmission under severe industrial environments. 12~24V Power Booster to 48V PoE JetNet 3810Gf / 3810f series designed with Korenix patented DC 12~24V to 48V boost technology, is the best solution for the vehicle PoE applications, where DC 48V power supply is not available. With the built-in power booster, the PoE switch series can be powered by DC 12~24V to deliver 15.4W per port and 65W per unit at DC 48V to PoE-enabled devices such as IP cameras, PoE Wireless APs, PoE IP phones…etc. and therefore, be easily applied in vehicles or carriages. Flexible Distance Transmission via Dual Gigabit / Fast Ethernet SFP ports JetNet 3810Gf / 3810f series features eight PoE ports and two uplink fast Ethernet / gigabit SFP combo ports. Customers can connect up to 8 IP cameras and uplink the large images to flexible distance applications through the 100Mbps and 1000Mbps single mode and multi mode SFP combo ports. QoS and Fault Relay provided The JetNet 3810Gf / 3810f series supports QoS to ensure the high quality of video traffic transmission by simply adjusting the priority of data transfer. In addition, it provides fault relay to automatically warn users if any abnormal situation occurs. As a result, users can quickly handle the emergency and shorten the fail-over time. For more information, contact a Madison Networking Specialist on 1800 72 79 79 or via our website www.madisontech.com.au/westermo

2012-05-01T01:53:18Z submarine-communications-cable-connects-vital-infrastructure-across-the-narrows

Madison Technologies has been commissioned by MC (QCLNG) JV to provide the backbone communications cable network and associated passive equipment for communications infrastructure, which will run the length of the Narrows Crossing which consists of afibre optic cable laid in a42 inch gas pipeline crossing of the marine channel, mangrove creeks andinter tidalmudflats between the export header pipeline and the main gas plants on Curtis Island. The submarine communications cablewill be laid on thesea bedbetween land-based stations to carrytelecommunication and data signals across the Narrows to monitor the gas flow and the remote control of critical equipment and infrastructure such as emergency shutdown valves. These pipelines will carry Coal Seam Gas from gas fields in central Queensland to the export facility on Curtis Island. Construction is scheduled for completion in late 2012. The first delivery of LNG from the plant is scheduled for 2014. For more information, contact Madison’s networking specialists on 1800 72 79 79 or www.madisontech.com.au

2012-04-04T04:03:22Z new-pelco-digital-sentry-from-madison-more-powerful-than-ever

The new NVR comes preloaded with DS NVs Network Video Management Software and delivers 280 Mbps bandwidth for recording and viewing as many as 128 Pelco and third-party IP cameras. Analogue cameras on the network are supported using encoders from Pelco or from a number of 3rd party vendors. For DVR replacements, the new system can be deployed as a hybrid with optional support for up to 64 direct-attached analog cameras at D1, full-frame rate recording. And with the new front-accessible, removable hard disk drives and an engineered cooling system to sustain increased performance, the DS SRV provides built-in reliability customers can trust. With support of the Pelco Partner First program, Digital Sentry is a powerful integration platform for access control and other security-related applications. Open architecture is supported with ONVIF compliance and a large number of IP-specific drivers for third-party IP cameras and encoders. With no certification required, the simplified Digital Sentry line replaces all previous DS hardware offerings, making the product easier to configure, order, and support. For more information, contact Madison’s networking specialists on 1800 72 79 79 or www.madisontech.com.au

2012-04-04T04:01:32Z convenient-reliable-wlan-for-automation-applications

The convenience of being able to connect devices without the use of wires has led to the unprecedented success of wireless technologies in the commercial sector, and these same technologies are making a headstrong move into industrial environments. The Moxa AWK-1121 WLAN client from Madison Technologies provides all key wireless benefits like mobility, flexibility, wider coverage, and economic savings, and is specifically designed for hard-to-wire, tightly spaced applications. Roaming handoffs for the AWK-1121 are benchmarked at an unprecedented 100ms or less, making it so speedy that connectivity gaps are effectively eliminated for latency-sensitive applications like automatic guided vehicles (AGV) in factory automation systems, or like those often found in intelligent transportation systems (ITS). With this unique collection of innovative features, the AWK-1121 is extremely simple to set up and secure: because it provides MAC bridging (L2 transparency) in the AP/Client mode; it escapes the security, connection, and speed limitations of traditional bridging configurations like WDS mode. Your wireless AP will be able to use bridging mode while still accepting however many clients your network currently supports, and may simply and quickly add however many more it might require. These sound benefits are the unique results of the AWK-1121’s quality design, providing you with flexibility, convenience, economy and efficiency. If you are building a wireless network from scratch, you will find the AWK-1121 the most convenient and reliable solution for automation applications in the manufacturing, transportation, power, and oil and gas industries.Product Features • IEEE 802.11a/b/g compliant WLAN client • Client-based, under-100ms roaming handoffs • -40 to 75C operating range (T models) • Redundant 12 to 48 VDC power inputs • MAC bridging for transparent networking* • PoE 802.11af compliant (PoE model Only) • Maximum security with WEP/WPA/WPA2/802.11X and powerful custom filters. *Note: MAC bridging will not be available until Q3 2012.Click here for more information

2012-04-04T03:59:27Z australia-s-latest-powerhouse-point-to-point-link

Available exclusively from Madison Technologies, the Alvarion BreezeULTRA is a family of wireless broadband products that operates in the 4.9 to 5.9 GHz band which includes the licence exempt 5.4 and 5.8 GHz bands available in Australia. The ULTRA is available today in high capacity point-to-point (P2P) format. This will soon be followed by the point-to-multipoint (P2MP) version and then a hybrid backhaul-to-multipoint (HB2MP) configuration. This is the flexible growth platform for the future.The BreezeULTRA wireless products are based on a high-power, multi-radio architecture and advanced MIMO (Multiple Input, Multiple Output) radio techniques to support extended capacity and coverage.Very high net data throughput of 250 Mbps is achieved with the BreezeULTRA P6000 P2P series. With the dual radio version the capacity is increased even further to a market leading 500Mbps. The dual radio version will also act as a single-box link extender or repeater for applications where a direct link path is not available.BreezeULTRA optimises the performance for applications such as data, voice, or video using quality of service (QoS) to guarantee high-quality voice and to support time-critical applications in parallel for broadband applications such as high-definition video streaming.Contact Madison’s Wireless specialists on 1800 12 22 23 or www.madisontech.com.auTech Specs•Capacity: Transmit voice, video and data at 250 Mbps net per radio•Distance: Range in excess of 40km•Difficult Paths: World leading non-line-of-sight (NLOS) coverage and interference mitigation with OFDM, MIMO and diversity technologies.•Ultra-fast on board packet processing at 80,000 PPS•Optimised performance for voice, video and data using QoS•High power PoE output for powering IP cameras•Capacity upgradable over-the-air via software keys•Latest generation IP radio – platform for the future

2012-04-04T03:58:38Z all-in-one-micro-rtu-controller-provides-complete-communications-redundancy

The Moxa ioLogik W5348-HSDPA-C series from Madison Technologies is a hardy, metal encased all-in-one micro RTU controller that combines a cellular modem, an I/O controller, and a data logger into a compact device that provides complete communication redundancy with built-in GPRS/HSDPA.Along with a variety of mixed I/O combinations, users can choose standard C/C++ for more application-oriented and advanced customisations. The Moxa ioLogik W5348-HSDPA-C supports stand-alone data logging in a storage space expandable up to 32GB, and comes with the innovative, patented Active OPC Server software, based on push technology.Users can expect many significant value-added benefits that include reductions in data transmission, lowered hardware costs, and reduced deployment and maintenance costs. This sleek RTU provide benefits beyond mere RTU performance, and is ideal solution for any number of industrial applications, such as:•Pipeline Monitoring for Water, Oil & Gas•Pump Station Monitoring / Lift Station MonitoringContact Madison’s Networking specialists on 1800 72 79 79 or www.madisontech.com.au

2012-02-21T06:06:28Z ultra-rugged-switch-with-dual-bypass-relay-for-mission-critical-applications

With an ultra-robust design, vibration resistance and a dual failsafe bypass relay, the Westermo Red Fox RFR-12-FB is ideal for situations where mechanical stress, moisture, condensation, dirt or continuous vibrations could adversely affect the function of standard Ethernet switches. The rugged Westermo Red Fox RFR-12-FB Ethernet switch is designed for applications with severe operating conditions and greater resilience demands. Fully approved for on-board rolling stock, these units are ideal for deployment in trains, trams, busses, mining trucks, army vehicles and drilling rigs. The Westermo unique FRNT technology is the fastest and most robust protocol on the market to reconfigure a large network in the event of any link or hardware failure. For redundant backbone solutions the integrated LACP support provides another redundancy layer on top of the bypass relay function. Safely access the switch from anywhere in the network, or access the product directly via a console port. The HTTPS secured web configuration interface has been designed for ease of use. For more advanced configuration, the SSH encrypted industry standard CLI allows for extremely detailed settings. For further information, go towww.madisontech.com.au/redfox