Epson Develops an Oven-Controlled Crystal Oscillator That Consumes 56% Less Power than Conventional OCXOs

New product OG7050CAN

Epson has developed an oven-controlled crystal oscillator (OCXO) 'OG7050CAN' that consumes 56% less power than the products in Epson's earlier OG1409 series ("earlier products")1. Measuring 7.0 × 5.0mm and with a height of 3.3mm (Typ.), the new OCXO is 85% smaller than earlier products by cubic volume.

Reference signal sources in wired and wireless backbone communication facilities such as base stations and data centres are subject to strict accuracy and stability criteria. Oven-controlled crystal oscillators are used as a reference signal source in such applications because of their high stability. The crystal oscillator is enclosed in a temperature-controlled chamber ("oven")2. The temperature inside the oven is held constant even when the ambient temperature changes, thereby minimising frequency drift.
 

Left: Earlier product. Right: New product

Communication data traffic continues to grow, propelled by the roll-out of 5th generation communication systems (5G), the spread of the Internet of Things (IoT), the use of artificial intelligence (AI) in data centres, and the upcoming 6G services. These changes are expected to cause power consumption at base stations and data centres to sharply increase and drive demand for low-power OCXOs used as reference signal sources.

To meet this demand, Epson drew on its crystal device, semiconductor, and mounting technologies to develop an OCXO that consumes 56% less power and is 85% smaller than earlier products.
 

This improvement was enabled in large part by the miniaturisation of the oven and the stress compensated (SC) cut crystal unit.
 

Earlier products: 0.43W at 25℃. Developmental product: 0.2W at 25℃

Unlike AT-cut crystal units3 used in ordinary crystal oscillators, SC-cut crystal units are highly stable and resistant to thermal shock and vibration. Earlier products employed a circular SC-cut crystal unit with a diameter of 6mm, requiring a large oven and a large amount of power to maintain a constant temperature.  

To solve this problem, Epson redesigned the crystal unit, using a rectangular structure instead of a circular one. Not only did they succeed in reducing the size of the SC-cut crystal unit by 90%, they did so while improving performance and reducing power consumption. The redesign also reduced the cubic volume of the oven by 96% compared to the earlier products.

Another challenge the developers faced was to achieve a low-power oven structure. Epson developed and optimised its own oscillator IC and heater IC to hold the SC-cut crystal unit in the oven at a constant temperature while minimising power consumption.  The oven is bonded inside the OCXO package with an adhesive that has low thermal conductivity to improve internal insulation.

This limits the loss of heat from the heater IC and keeps power consumption low.  By using a digital means of controlling the temperature of the SC-cut crystal unit instead of the conventional analogue method, the developers were able to keep the crystal unit's temperature more stable even when the ambient temperature fluctuates, reducing the frequency/temperature characteristics of the OCXO from ±50 × 10-9 to ±3 × 10-9.(4)

These developments have resulted in a highly accurate OCXO that consumes 56% less power (0.2W at 25℃) than the earlier products and is 85% smaller (7.0 × 5.0mm size). This reduction in power consumption enables the temperature of the SC-cut crystal unit to stabilise faster, reducing frequency stability at startup by a factor of 5 or more compared to the earlier products.

As a leader in crystal devices, Epson will continue to provide crystal device products that meet the needs of all manner of electronic devices and social infrastructure.

New Product Features
• Low power consumption: 0.2W at 25℃ (still air)
• Small size: 7.0 × 5.0 × 3.3mm, Typ.
• Frequency/temperature characteristics: ±3 × 10-9
• Startup time until Frequency stabilises to within ±20 × 10-9:30s.
• A PLL5 function allows the output frequency to be set anywhere from 1MHz to 170MHz through internal IC settings.
• A jitter reduction function controls PLL induced noise deterioration.

Samples of the new OCXO will be available from April 2025.
 

Follow Epson on social media:
LinkedIn: @Epson-Australia
Facebook: @EpsonAustralia
Twitter: @EpsonAust
YouTube: @EpsonAustralia
Instagram: @EpsonAust

1Epson's OG1409 series of OCXOs (now discontinued)
2Oven: A device designed to maintain the inside of the chamber at a certain constant temperature 
3AT-cut crystal unit: A crystal resonator with a crystal chip produced from a rough crystal cut at a specific angle known as the AT cut. It covers the megahertz (MHz) band and is the most popular type of quartz crystal in use. AT-cut crystals have the frequency/temperature characteristics of a cubic function with a zero-crossing point near room temperature, so they provide excellent temperature characteristics.
(4)10-9 means one part per billion, and ±10 × 10-9 is also commonly referred to as ±10 ppb.
5PLL: Abbreviation for phase locked loop, an electronic circuit that produces a desired output frequency to match a clock signal of a specific frequency.

Ends

About Epson, Epson Australia and Epson New Zealand
Epson is a global technology leader whose philosophy of efficient, compact and precise innovation enriches lives and helps create a better world. The company is focused on solving societal issues through innovations in home and office printing, commercial and industrial printing, manufacturing, visual and lifestyle. Epson's goal is to become carbon negative and eliminate use of exhaustible underground resources such as oil and metal by 2050.
Led by the Japan-based Seiko Epson Corporation, the worldwide Epson Group generates annual sales of more than JPY 1 trillion.
https://corporate.epson/en 

Epson Australia offers an extensive array of award-winning image capture and image output products for the commercial, industrial, consumer, business, photography and graphic arts markets, and is also a leading supplier of value-added point-of-sale (POS) solutions for the retail market. Epson is the market leader in Australia and worldwide in sales of projectors for the home, office and education. Established in 1983 and now in its 41st year of operation, Epson Australia is headquartered in North Sydney and is a subsidiary of the Epson Group headquartered in Japan.
www.epson.com.au 

Epson New Zealand offers an extensive array of award-winning image capture and image output products for the commercial, industrial, consumer, business, photography and graphic arts markets, and is also a leading supplier of value-added point-of-sale (POS) solutions for the retail market. Epson is a market leader in New Zealand, Australia and worldwide in sales of projectors for the home, office and education. Epson New Zealand is headquartered in Auckland and is a branch of Epson Australia Pty Limited, a subsidiary of the Epson Group headquartered in Japan.
www.epson.co.nz