Annual Mold Inspection for Chicago Homes & Workplaces Recommended by Mold Expert Phil Fry

Montrose, MI, February 01, 2015 -- “Because exposure to elevated levels of indoor mold can cause over 100 major diseases and medical problems, Chicago-area residences and commercial buildings should be mold inspected and tested at least annually to find water intrusion and mold growth problems early on so that such problems can be taken care of promptly to prevent mold illnesses for occupants,” recommends Phillip Fry, Professional Industrial Hygienist, Certified Environmental Hygienist, and co-manager of EnviroFry, a nationwide industrial hygienist firm.

The top 100 mold-related illnesses are listed on the educational website www.moldinspector.com, which has been online since 1999 to provide objective and practical information on toxic and household mold health, inspection, testing, removal, remediation, and prevention.

The ten steps for effective and safe, do-it-yourself mold removal are posted at www.moldinspector.com/mold_removal.htm.

To uncover hidden toxic mold growth, EnviroFry does a very careful physical inspection and investigation of a house or commercial building from the attic down to the basement or crawl space, including inside heating, ventilating, and air conditioning (HVAC) equipment and ducts, plus mold testing of the air flow from the HVAC air supply ducts and in all areas of the building, according to Fry, who is author of five mold advice books available at www.moldmart.net.

EnviroFry uses high tech environmental tools and solutions, such as fiber optics video inspection inside building surfaces and areas, infrared thermal camera inspection for water leaks and water damage, the United Kingdom’s best moisture meter, high output ozone gas to kill both toxic mold and germs and odors, the fogging of a special enzyme that destroys the cellular structure of mold spores, mold colonies, bacteria, and viruses, and comprehensive and innovative mold testing of building surfaces, room air, and the outward air flow out of heating/cooling air duct registers.

Contact Mr. Fry by emailing phil@moldinspector.com, or phoning toll-free 1-866-300-1616 or cell 1-480-310-7970 or visiting websites www.chicagomoldinspectors.com and www.moldexpertconsultants.com.

Contact:
Phillip Fry
EnviroFry
10104 Sheridan Rd.,
Montrose, MI 48457
Phone Toll-Free 1-866-300-1616
Cell 1-480-310-7970
phil@moldinspector.com
http://www.chicagomoldinspectors.com